Dymap Software

DyMap Logo

Watch how the temperature changes.

DyMap shows the changes of temperature (or other physical quantity), across an area and over time, in a colour map movie form (Dynamic mapping).

What is DyMap?

The T-TEC DyMap program can combine measurements from a number of carefully placed dataloggers, to create a movie of temperatures. Data from iButton Thermochron temperature dataloggers, T-TEC data loggers or other loggers where the files are compatible may be used.


Flash excerpt from a Dymap movie

How does it work?

T-TEC or Thermochron data loggers are placed in a network, in rows and columns and layers, with their positions coded in the comments field of the logger file, for example, as 'R1C2L1'. Once the T-TEC data loggers are read by the T-TEC software, the files are stored on the computer. DyMap can combine the measurements from all the dataloggers and show them as a form of movie. The readings may be from a store room, cool room, greenhouse, church, freezer, refrigerator, anywhere the temperature control is important. The movie is seen as though the viewer were overlooking the area for the duration. In 3 dimensional views the user can choose to see rows, columns or layers individually.

Can the movie be sent to others who do not have DyMap?

The DyMap program can create reports in a 'read only' format so the results can be presented easily in a very professional CD presentation. Such a report from the above example can be downloaded here in a .zip format, along with the manual, help file and full explanation of the 'Read Only' program.

DyMap 2D temperature movie software example

Information from 8 datalogger, each as a graph, on the same graph

Above: A graph of 8 of the 24 loggers used to measure the room

Data from the top 8 data loggers (Rows R1 and R2) in the room, for the whole duration of the test, graphed in T-TEC software.

Set up of the T-TEC data loggers

For example, 26 T-TEC dataloggers were used to measure a room. 24 of the data loggers were placed in a 6x4 meter network on the floor (at 1 meter intervals) of the room and the last two dataloggers measured outside temperatures. S1 on the eastern side and S2 on the western side. The data from each datalogger was downloaded to the computer.\

This example can be downloaded, from the downloads section, and run on your own system.

DyMap graph at 8PM and 3AM with data from all data loggers

Above: Slides taken at 8PM and 3AM

A picture excerpt from a temperature movie made by DyMap software, with the data from all 24 loggers,
first as 8 PM that night, and then later, at 3AM.

Test area description

The test area is an upstairs room with a staircase at the upper right corner, leading to the lower floor. The left side (West) and most of the south and north sides are glass. The room is unoccupied during the day. In the evening, a heater is switched on downstairs and a small fan heater in the room itself. Both heaters are switched off later.