Electronic Thermometers

EMT999

EMT 999

Electronic Min/Max Alarm & Clock thermometer is a highly accurate thermometer with many features. The large screen can toggle through the information of settings, modes and alarms. The time an alarm started can be shown. It can work with and without the attached sensor, which has a small bottle for preventing false alarms. Suitable for vaccine and medical refrigerators, incubators, storage of food & chemicals.
Read more on EMT 999

EMT888sm

EMT888

Electronic Min-max Thermometer (EMT 888) is a handy thermometer that displays the current, the minimum and the maximum temperature, easily reset with only one button. Great for fridges and ambient temperatures. Example of use: vaccine fridges.
Read more on EMT888

RT300 2

RT300

The RT300 DUAL Thermometer is very handy because it offers two functions in one:
Infra red measurement as well as a very accurate fold-out probe. Designed for food inspection, it has Food Zone indication: A green light will show if the food measured is less than 4 °C or above 60 °C. At other temperatures a red light will show.
Read more on RT300

RT600B2 F2

RT600B

RT600 is a water and soil resistant thermometer with covered pushbuttons for On/off, C/F and Minimum/maximum indication.
There is a hole for hanging and a protective cover with a pocket clip. The cover may be used for stirring or may serve as an extra long handle. The large temperature range
makes the thermometer very versatile. Use for: Fresh chilled food, Frozen foods, Chemicals, Vaccines, Food processing and much more
Read more on RT600B

RT602B

RT602

RT602is a rugged and robust fast reading thermometer. It has a tapered probe with a smaller pointed tip, which makes it easy to push through vegetables, fruit or meat. The smaller size makes it easier to carry in the pocket.
Large display of temperature.
Water resistant with covered push button for On/off.

Read more on RT602

EzyScan A

EzyScan Dual

The EzyScan Dual is a hand-held infra-red thermometer, that can measure surface temperature without coming into contact with that it is measuring. To scan, keep the button pressed to scan temperatures. Lift the finger and EzyScan Dual will hold the last measurement for 15 seconds.
Read more on EzyScan Dual

RS232

The RS232 thermometer has a Pt100 sensor and outputs the temperature measurements as RS232 signals. It is meant to be incorporated into another system, for example, in trucks, where these signals can be sent through GPRS or other, to record and keep track of remote fridges.
Read more on RS232